China Best Sales CE Approved 1-3t CZPT 5ton Tractor Loader and Backhoe with Mower near me manufacturer

Product Description

 

The specification of 2.5ton backhoe loader BLT388 Excavator

Transport Dimension

Overall Operating Weight

8200KG

mm L*W*H

6230×2365×3752

Wheel base

2200mm

Min. Ground Clearance

300mm

Bucket Capacity

1.0m3

Breakout Force

38KN

Loading Lifting Capacity

2500KG

Bucket Dumping Height

2650mm

Bucket Dumping Distance

1571mm

Digging Depth

52mm

Backhoe Capacity

0.3 m3

Max. CZPT Depth

4085mm

Swing Angle of Excavator Grab

190o

Max. Pulling Force

39KN

Engine

Model

YC4A105Z-T20

Type

turbocharging four-stroke

Cylinder-Inside Diameter*Stroke

4-105

Rated Power

75KW/100HP

Rated Speed

2400r/min

Min. Fuel Consumption

235g/kw.h

Max.Torque

310NM

Displacement

4.3L

Steering System

Model of Steering Device

BZZ5-250

Steering Angle

±36 o

Min. turning radius

6581mm

Pressure of the system

12Mpa

Axle

Manufacturer

HangZhou Axle Factory

Main Transmission Type

Double Reduction

Final Reducer

Single Stage Final Reducer

Rated Loader of Axle

4/18.5t

 

Transmission System

Torque Converter

Model

YJ280

Type

Single-stage Three Elements

Max. Efficiency

84.40%

Inlet Pressure

0.4Mpa-0.55 Mpa

Outlet Pressure

1.2Mpa-1.5 Mpa

Cooling Method

Oil-cooling Pressure Circulation

Gearbox

Type

Fixed Shaft Power Transmission

Oil Pressure of Clutch

1373Kpa-1569 Kpa

Gears

Two Gears Ahead, Two Gears Astern

Max.Speed

22Km/h

Tyre

Model

14-17.5/19.5L-24

Pressure of Front wheel

0.22 Mpa

Pressure of Back Wheel

0.22 Mpa

Brake System

Service Brake

Air Over Oil Caliper Brake

External Type

Self-regulation

Self-balance

Emergency Brake

Operation Power Implementing brake

Manual Operation Power Terminating Brake

Hydraulic System

Digging Power of Excavator Grab

46.5KN

Digging Power of Dipper

31KN

Bucket Lifting Time

5.4S

Bucket Lowering Time

3.1S

Bucket Discharge Time

2.0S

 

After sales service

LTMG always treat after-sale service more important than sale.

Nowadays more than 30 agents around the world can supply CZPT professional after-sale service.

All the product of CZPT supplied with one year or 2000 working hours (which occurs first) period quality warranty.

Detail clauses and policies please check our website and product certificate.

The importance of pulleys

A pulley is a wheel that rides on an axle or axle. The purpose of the pulley is to change the direction of the tensioning cable. The cable then transfers the power from the shaft to the pulley. This article explains the importance of pulleys and demonstrates several different uses for this machine. Also, see the Mechanical Advantages section below for the different types. let's start.
pulley

simple machine

A simple pulley machine is a device used to transfer energy. It consists of a wheel with flexible material on the rim and a rope or chain tied to the other end. Then lift the load using the force applied to the other end. The mechanical advantage of this system is one, as the force applied to the load is the same as the force on the pulley shaft.
A simple pulley machine has many benefits, from the ability to build pyramids to building modern buildings with it. Pulleys are also popular with children because they can perform simple tasks such as lifting toys onto a slide, sliding them off the slide, and lifting them up again. These activities, called "transportation" by child development theorists, allow them to learn about the physics of simple machines in the process.
The mechanism works by using cables to transmit force. The cable is attached to 1 side of the pulley and the other side is pulled by the user. Lift the load by pulling on 1 end and the other end of the rope. Simple pulley machines have many commercial and everyday applications, including helping move large objects. They can be fixed or movable, and can be a combination of both. The present invention is a great tool for any beginner or engineer.

axis

The axle wheel is the basic mechanical part that amplifies the force. It may have originally appeared as a tool to lift buckets or heavy objects from a well. Its operation is demonstrated by large and small gears attached to the same shaft. When applied to an object, the force on the large gear F overcomes the force W on the pinion R. The ratio of these 2 forces is called the mechanical advantage.
The ideal mechanical advantage of shaft pulleys is their radius ratio. A large radius will result in a higher mechanical advantage than a small radius. A pulley is a wheel through which a rope or belt runs. Often the wheels are interconnected with cables or belts for added mechanical advantage. The number of support ropes depends on the desired mechanical advantage of the pulley.
In the design of the axle wheel, the axle is the fulcrum and the outer edge is the handle. In simple terms, wheels and axle pulleys are improved versions of levers. The axle pulley moves the load farther than the lever and connects to the load at the center of the axle. Shaft pulleys are versatile and widely used in construction.

rope or belt

Ropes or pulleys are mechanical devices used to move large masses. The rope supports a large mass and can be moved easily by applying a force equal to 1 quarter of the mass to the loose end. Quad pulleys have 4 wheels and provide the mechanical advantage of 4 wheels. It is often used in factories and workshops. It is also a popular choice in the construction industry. If you are installing a pulley in your vehicle, be sure to follow these simple installation instructions.
First, you need to understand the basics of how a rope or pulley works. The machine consists of 1 or more wheels that rotate on an axle. The rope or belt is wrapped around the pulley and the force exerted on the rope is spread around the pulley. It then transfers the force from 1 end of the rope to the other. The pulley system also helps reduce the force required to lift objects.
Another common rope or pulley is the differential pulley. This is similar to a rope pulley, but consists of 2 pulleys of different radii. The tension in the 2 halves of the rope supports half the load that the live pulley should carry. These 2 different types of pulleys are often used together in composite pulley systems.
pulley

Mechanical advantage

The mechanical advantage is the ratio of the force used to move the load through the pulley system to the force applied. It has been used to measure the effectiveness of pulley systems, but it also requires assumptions about applied forces and weights. In a simple 1:1 pulley system, the weight lifting the weight is the same as the weight of the person pulling the weight. Adding mechanical advantage can help make up for the lack of manpower.
This advantage stems from the mechanical properties of simple machines. It requires less force and takes up less space and time to accomplish the same task. The same effect can also be achieved by applying less force at a distance. Furthermore, this effect is called the output force ratio. The basic working principle of a pulley system is a rope with a fixed point at 1 end. The movable pulley can be moved with very little force to achieve the desired effect.
The load can be moved through the vertical entry using a simple pulley system. It can use a simple "pulley block" system with a 2:1 "ladder frame" or a 4:1 with dual pulleys. This can be combined with another simple pulley system to create a compound pulley system. In this case, a simple pulley system is pulling another pulley, giving it a 9:1 mechanical advantage.

Commonly used

You've probably seen pulley systems in your kitchen or laundry room. You probably already use it to hang clothes on an adjustable clothesline. You may have seen motor pulleys in the kitchens of commercial buildings. You might even have seen 1 on a crane. These machines use a pulley system to help them lift heavy loads. The same goes for theaters. Some pulleys are attached to the sides of the stage, enabling the operator to move up and down the stage.
Pulley systems have many uses in the oil and petroleum industry. For example, in the oil and gas industry, pulley systems are used to lay cables. They are arranged in a pulley structure to provide mechanical energy. When the rope is running, 2 pulleys are hung on the derrick to facilitate smooth running. In these applications, pulleys are very effective in lifting heavy objects.
A pulley is a simple mechanical device that converts mechanical energy into motion. Unlike chains, pulleys are designed to transfer power from 1 location to another. The force required to lift an object with a pulley is the same as that required by hand. It takes the same amount of force to lift a bucket of water, but it's more comfortable to pull sideways. A bucket of water weighs the same as when lifted vertically, so it's easy to see how this mechanism can be useful.
pulley

Safety Notice

When using pulleys, you should take several safety precautions to keep your employees and other workers on the job site safe. In addition to wearing a hard hat, you should also wear gloves to protect your hands. Using pulleys can lead to a variety of injuries, so it's important to keep these precautions in mind before using pulleys. Here are some of the most common:
Pulleys are an important piece of equipment to have on hand when lifting heavy objects. Pulleys not only reduce the force required to lift an object, but also the direction of the force. This is especially important if you are lifting heavy objects, such as a lawn mower or motorcycle. Before starting, it is important to make sure that the anchoring system can support the full weight of the object you are lifting.
When using a pulley system, make sure the anchor points are adequate to support the load. Check with the pulley manufacturer to determine the weight it can safely lift. If the load is too large, composite pulleys can be used instead. For vertical lifts, you should use a sprocket set and wear personal protective equipment. Safety precautions when using pulleys are critical to worker health and safety.

China Best Sales CE Approved 1-3t CZPT 5ton Tractor Loader and Backhoe with Mower     near me manufacturer China Best Sales CE Approved 1-3t CZPT 5ton Tractor Loader and Backhoe with Mower     near me manufacturer